MAHA FWT 1 Euro, Руководство по эксплуатации и техническому обслуживанию

Страница: 49 / 134

Eurosystem / Profi-LON PC Program Operation
4.10 D1 E101BA1-GB09
4.2.4.2 Brake Effectiveness Test
5 Slowly apply the brakes until the rollers
switch off, i.e. preset slip has been reached.
)
Slip left (or right )
The rollers stop.
)
Max. values
The measured brake force appears on the
display and is filed in the temporary
storage. The corresponding box appears
green.
6 Release brake pedal immediately.
)
Please brake
This message in the instruction line
confirms that the test stand is ready for the
next test and the rollers are running again.
7 Drive off the rollers in a forward direction
with the rollers running.
After the ovality and brake force tests for the front axle (FA), the side-slip test (4.2.2) and the
shock absorber test (4.2.3) for the rear axle are conducted. Then drive onto the brake tester
with the rear axle.
Now the brake force test for the parking brake (PB) follows. This is analogous to the brake
force test for the front axle. Please follow steps 5 and 6.
Finally the ovality and brake force tests for the rear axle (RA) are conducted. The procedure is
analogous to the front axle tests. Please follow steps 1 to 7.
4.2.4.3 Exit test lane
The automatic testing procedure is now
finished. The display returns to the main menu.
Instruction line:
)
Test values available (store)
8 Wait until the roller drive of the brake tester
switches off and the rollers are at standstill.
9 If possible exit test lane in a forward
direction, otherwise drive in a reverse
direction quickly over the roller set of the
brake tester and the test plates of the shock
absorber tester and side-slip tester.
10 Store the measurement values as
described in section 4.2.6 “ Storage of the
Test Values“ .