manualshive.com logo in svg

Magtrol DSP7000, Руководство пользователя, Страница: 123 / 160

Поделиться
Скачать
Magtrol DSP7000 Скачать руководство пользователя страница 123

108

Magtrol Model DSP7000 Dynamometer Controller

Chapter 9 – Calibration

MAINTENANCE

2.  Turn on the DSP7000.
3.  Allow the DSP7000 to warm up for at least 30 minutes.

9.3.2 

C

aliBraTion

 

of

 a

nalog

 

To

 D

igiTal

 C

onverTerS

1.  A/D offset and gain on any of the 6 analog inputs.
 

•  TSC1 (low gain and high gain)

 

•  TSC2 (low gain and high gain)

 

•  IO Card 1 Channel 1

 

•  IO Card 1 Channel 2

 

•  IO Card 2 Channel 1

 

•  IO Card 2 Channel 2

2.  Connect the external voltage reference common to the input connector.
 

•  TSC1 = Pin 13 of the TSC1 connector

 

•  TSC2 = Pin 13 of the TSC2 connector

 

•  IO Card 1 Channel 1 = Pin 16 of the IO Card 1 connector

 

•  IO Card 1 Channel 2 = Pin 17 of the IO Card 1 connector

 

•  IO Card 2 Channel 1 = Pin 16 of the IO Card 2 connector

 

•  IO Card 2 Channel 2 = Pin 17 of the IO Card 2 connector

3.  Connect the external voltage reference high to the input connector.
 

•  TSC1 = Pin 14 of the TSC1 connector

 

•  TSC2 = Pin 14 of the TSC2 connector

 

•  IO Card 1 Channel 1 = Pin 3 of the IO Card 1 connector

 

•  IO Card 1 Channel 2 = Pin 4 of the IO Card 1 connector

 

•  IO Card 2 Channel 1 = Pin 3 of the IO Card 2 connector

 

•  IO Card 2 Channel 2 = Pin 4 of the IO Card 2 connector

4.  Send the DSP7000 the MoDE2 command.  This command puts the unit into engineering 

mode.  After completing calibration, send the DSP7000 the MoDE0 command.

 

NoTE: 

The appropriate DIN command needs to be sent to choose between 
hD (2 Volt) and Wb/Pb (10 Volt) calibration to activate internal 
multiplexer.

5.  Send the DSP7000 the CALAD# command.  This chooses the A/D to be calibrated.  Where 

# represents the A/D being calibrated.

 

0 = TSC1 (hD 2.0 volts)

 

1 = TSC1 (Wb/Pb 10.0 volts)

 

2 = TSC2 (hD 2.0 volts)

 

3 = TSC2 (WbPb 10.0 volts)

 

4 = Io Card 1 Channel 1

 

5 = Io Card 1 Channel 2

Содержание DSP7000

































































































































































Отзывы:

Нет отзывов