3 - Preventive Maintenance Procedure
ExpressCard 2000| Instant Issuance Card Personalization System | Preventive Maintenance Procedure
Page 8 of 25 (
D99875651-25
)
3.3
Clean All Transport Rollers
Follow these steps to clean the rollers on the hopper transport, XY transport, and exit transport. Use the
white
cleaning cards:
1)
Remove hoppers 1 and 2.
2)
Remove the tipper foil cartridge and set it aside in a secure location, or offer it to the customer for
temporary storage or secure disposal.
3)
On the touchscreen, navigate to
Menu
>
Settings
>
Service
>
MCP Cmds
to open the
Controller Commands
page.
4)
Use the
white
cleaning card and
do not let the rollers take it out of your hand
as you clean each set
of rollers as follows:
a)
Feed the card partly into the hopper transport and press the
Roll to Printer
button. Hold the card
there until the rollers stop moving.
Figure 3-1 - Cleaning the Hopper Transport Rollers (TOP VIEW FROM FRONT)
b)
Feed the card partly into the
left
side of the exit transport and press the
Exit Eject
button. Hold
the card there until the rollers stop moving.
Figure 3-2 - Cleaning the Left Side of the Exit Transport (TOP VIEW FROM FRONT)
c)
Feed the card partly into the
right
side of the exit transport and press the
Exit Reject
button.
Push inward to keep the card from being pushed out until the rollers stop moving.
