3 - Preventive Maintenance Procedure
ExpressCard 2000| Instant Issuance Card Personalization System | Preventive Maintenance Procedure
Page 18 of 25 (
D99875651-25
)
3.10
Clean the Card Cleaning Roller
Clean the card cleaning roller by following these steps:
1)
Remove any jewelry or accessories that could touch the print head during cleaning.
2)
Open the image printer.
Figure 3-8 - Removing the Card Cleaning Roller
3)
Remove the cleaning roller (see
4)
Unwrap the roller wipe from the kit and rub it gently over the entire surface of the roller. Pay special
attention to spots that feel uneven, which may be dirt or dust stuck to the roller. If there are any
uneven or rough spots you can not wipe off, contact MagTek Support Services for assistance.
5)
When the card cleaning roller has dried, re-install it into the image printer.
