M C C - 3 5 A S
54
Step:
Assume the first card is the standard card. The later card’s color edge is
smaller and smaller.
1. Open the register mark function if the register mark has been printed onto
the sheet.
2. Click the icon
to increase the cut data by 0.1% each time and run
one sheet to check until the color edge is nearly the same.
3. If the color edge is nearly the same, but the color edge is bigger than
standard card. Click the icon
to decrease cut data by 0.1mm each
time and run one sheet to check until it reaches correct size.
!
More information for repairs referred to technician manual.
