M C C - 3 5 A S
3
Chapter 2 Safety
Please shut down the machine before the maintenance.
In order to avoid any mistake when re-connecting wires back, we advise you
to mark each connector before replace of any electrical component.
Mind that every connection should be firm, first hold both sides of the
connector, and then, in the middle, not firm connection is possible to damage
the electrical components.
Power supply
AC input
，
Voltage/Frequency is:
AC 110-240V/50-60Hz.
！
If the voltage or frequency are not in the range, the
machine may not be used normally or even may
cause unrecoverable damage
Power cord
，
Over 10A current is endurable
！
1. Do not remove the cord when the machine is running,
illegal operation may cause component damage or
machinery jam
2. Remove the cord when you are installing components.
Ground symbol. If you see this symbol in any place,
please do not touch it anyhow, or uninstall it.
!
If the ground is not well connected, it may cause human
body injury.
