Limitation of Liability
In no event shall Magnum Lighting or any of its subsidiaries or affiliates be liable for any indirect,
special, incidental or consequential injury to persons or damage to property caused by the use
of any of our products. By purchasing from Magnum Lighting, you hereby indicate that it is your
sole responsibility as the buyer and not Magnum Lighting to determine and obey all applicable
local, state and federal laws governing the purchase, possession and/or use of the products sold by
Magnum Lighting.
Magnum Lighting will not be responsible to you or any third party for any direct, indirect, special,
incidental or consequential damages, arising out of use, misuse or inability to use any of our
products. By purchasing the LD1000 home laser system, the buyer represents that the products
purchased will be used only in a lawful manner. Consult an attorney or law enforcement professional,
regarding local, state and federal laws before using the product in a public setting.
NOTICE: All products sold by Magnum Lighting may not be used to violate the privacy rights
of others. In no way shall Magnum Lighting or its or any of its subsidiaries or affiliates be held
responsible for inappropriate use of its products.
IT IS THE SOLE RESPONSIBILITY OF THE BUYER TO CONSULT LEGAL COUNSEL FOR THE
INTERPRETATION OF ANY LAWS APPLICABLE TO THE AREA OF INTENDED USE OF THESE PRODUCTS.
WARNING:
The LD1000 should not be shone directly into anyone’s eyes. It could cause eye damage
or blindness.
PROBLEM
The product doesn’t switch on.
The product can turn on but no
light coming out.
The beam appears dim.
SUGGESTED SOLUTION
• Power cable may not be properly connected. Re-connect
the power cable.
• Power supply is damaged or abnormal. Call qualified
personnel/technician for repair.
• If damage is suspected, call qualified personnel/technician
for repair. DO NOT attempt to service it yourself.
• USB cable may not be connected properly or the LaserOS
APP is not running. Check steps outlined in the quick-start
guide if anything was missed.
• If damage suspected, call qualified personnel/technician
for repair. DO NOT attempt to service it yourself.
• The product is too hot. Take appropriate ventilation
measures to keep it cool.
Troubleshooting
Here are a few simple solutions to common difficulties to try out first to get you up and running
quickly. If you are having any difficulty with your laser projector, please feel free to contact us
online, any time, at [email protected].
