Magnum LD1000 Скачать руководство пользователя страница 11

12. Should you have difficulty operating the laser properly and troubleshooting does not work, 

go to http://www.magnumlighting.com for support and RMA assistance if necessary. Do not 

attempt to service, modify or fix the laser yourself. You will be provided with instructions on 

how to send the laser projector back for repair.

13. Before using this product in any capacity, ensure that the unit is properly secured to prevent 

accidental beam shifts and that a safety cable is used for any aerial rigging.

14. This product is not a toy and should be kept inaccessible to unauthorized persons before, 

during, and after use. Authorized persons should only be employees of an FDA variance 

holder. Keep away from minors. DO NOT allow lasers to hit aircraft or enter airspace. Shining a 

laser at an aircraft in the US is considered a federal crime punishable by fines or jailtime.**

15. Before using this product, it is the responsibility of the user to be familiar with all Federal and 

State reporting and usage requirements. Laws vary by state, some US states require additional 

licensing and/or registration. Many locations require operation only under the supervision of 

a trained Laser Safety Officer (LSO). An FDA variance is required to operate this product in the 

United States.*** 

16. For all venues you must designate safe and restricted areas of the venue where persons are or 

are not allowed to be respectively. The “safe areas” should not be subject to any laser radiation 

either directly or indirectly. By  protocol, there must be at least a 3 meter buffer between safe 

and restricted areas on all sides. In other words, all laser beams must terminate (ie. not be 

reflected away) in the restricted areas to avoid human contact. The laser must never be aimed 

at or allowed to be directed or reflected toward other people or reflective objects.

17. Do not stand in front of the laser while active. All persons should wear protective eyewear 

while rigging, maintaining, or otherwise working with the laser.

*Failure to follow the above precautions and other precautions contained in this user manual, 

particularly with regard to human exposure to laser radiation and electrical safety, may result in 

serious injury, loss of vision, electric shock or skin damage. Class 4 lasers must be handled and 

operated with care and extreme caution.

**This product should NOT be operated by persons who are not trained in proper laser safety 

procedures and/or do not know how to use all components of a laser system properly.

***For US owners, you are permitted under U.S. federal and state laws to own and use a laser 

projector of whatever power you wish in the privacy of your own home, with friends and family.

The safety procedures outlined in this manual must be observed at all times to provide you with 

safe and fun laser displays. Please contact us if you have any questions about how to safely and 

effectively use our products!

For more safety information & guidance please refer to ANSI Z136.1 (2007) Safe Use of Laser 

available at the Laser Institute of America website: www.laserinstitute.org

Содержание LD1000














Отзывы: