LD1000 Parts Diagram
Technical Specifications
LASER PRODUCT CLASS: Class 4 Laser
RED: 637nm 150mw
GREEN: 520nm 100mw
BLUE: 450nm <700mw
EMISSION TYPE: CW
BEAM DIAMETER: 4mm
BEAM DIVERGENCE: 1.0mRad
1
3
6
7
4
8
5
1. Laser Aperture - Laser light is
emitted from this opening.
2. Beam Block - Prevents laser
emission and also restricts the laser
scan from going into an audience.
3. USB Port - Provides connection
and control of the LD1000 via a PC/
Mac/Android device. The laser will
turn off if it is disconnected.
4. Key Control - Prevents accidental
operation. Resetting of the key
control will be required if there is
a power loss or remote interlock
cycling.
5. Power Switch - Toggles the power
ON or OFF.
6. Remote Interlock Connector-
Provides a safety shut-off for
terminating the laser emission via
a jumper connection. A jumper is
included with the product.
7. Fuse - Provides overcurrent
protection.
8. Mains Input - Power connection for
the laser via a wall outlet.
DAC / Software
MAC: OSX 10.6+
PC: Windows 7+, 1GHz, 2GB of RAM
ANDROID: Android 4.4+
INPUT MODES: Line-in (25ms latency)
or Microphone (40ms latency)
LaserOS: Features an ILDA player with
a selection of over 100 visualizers and
various apps included.
2
SCAN ANGLE (MECHANICAL): +/- 20 degrees
SCANNER: 20kpps
REQUIRED EYEWEAR O.D.: 3.0+ (450nm - 637nm)
NOHD: 447 meters
SIZE: 20(L) x 15(W) x 10(H) cm
NET WEIGHT: 2kg
VOLTAGE: 100-240V
