Magnetrol Thermatel TD1, Инструкция по установке и эксплуатации

Страница: 20 / 32

20 54-610 Thermatel ® Model TD1/TD2 Flow Level Switch
3.7 Agency Approvals
AGENCY MODEL APPROVED APPROVAL CATEGORY APPROVAL CLASSES
FM/FMc TD1-2D00-0XX
Explosion Proof FM19US0169/FM19CA0128X
TD2-XX0X-Xab
Class
I
, Div 1; Groups B, C, D TD1=T5 TD2=T5
a = 3, C, G
Class
II & III
, Div 1; Groups E, F, G
b = 0, 1, 2, 3
Type 4X, -40°C
≤
Ta
≤
+70°C
TD1-2D00-0X0
Flame Proof Cl
I
, Zn 0, 1, AEx/Ex db+ib/db, Grp IIC T5...T4 Ga/Gb
TD2-XX0X-Xab
■
indicates probe
■
Cl I, Zn 1, AEx/Ex db IIC T5 Gb
a = 3, C, G
■
Cl I, Zn 0,1 AEx/Ex db IIC T5 Ga/Gb
b = 0, 1, 2, 3
■
Cl I, Zn 0, 1, AEx/Ex db+ib, Grp IIC T5...T4 Ga/Gb
Type 4X and IP66, -40°C
≤
Ta
≤
+70°C
TD1-2D00-0XX
Non-Incendive Class
I
, Div 2; Groups A, B, C, D
TD2-XX0X-XXX
Class
II & III
, Div 2; Groups E, F, G T4
Type 4X, -40°C
≤
Ta
≤
+70°C
PROBE MODEL
Explosion Proof
■
Class
I
, Div 1; Groups B, C, D T4
TXX-XXXX-XXX
■
indicates probe
■
Class
II & III
, Div 1; Groups E, F, G
Type 4X, -40°C
≤
Ta
≤
+70°C
For probe rating: Select the type of protection and mark one of the boxes. Once the type of protection is selected, it shall not be changed
ATEX/IEC Zone 0 Service
TXX-XDXX-XCX
Ex db Flame Proof FM 19ATEX0203X/IECEx FMG 19.0047X
■
indicates probe II 1/2 G Ex db+ ib/db IIC T5...T4 Ga/Gb
II 2(1) G Ex db [ib] IIC T4 Gb
■
II 1/2 G Ex db IIC T5...T4 Ga/Gb
■
II 1/2 G Ex db+ib IIC T5...T4 Ga/Gb
-40°C
≤
Ta
≤
+70°C
TXX-XHXX-XCX
Ex db Flame Proof IEC Ex db IIC T5...T4 Gb
IP66, -40°C
≤
Ta
≤
+70°C
(Zone 0 in conjunction with hermetically sealed relay: Probe must be twin tip design
and made from Hastelloy C, Monel, or 1mm thick stainless steel.)
Zone 1 Service
TXX-XXXX-XGX
Ex db Flame Proof II 2 G Ex db IIC T5...T4 Gb
IEC Ex db IIC T5...T4 Gb
IP66
PROBE MODEL
II 2 G Ex db IIC T5...T4 Gb
TXX-XXXX-XXX
-40°C
≤
Ta
≤
+70°C
INMETRO Zone 0 Service
TD1-2D00-0XX
Ex db Flame Proof BR-Ex d[ib] IIC T5/T4 IP66 - Electronics
TD2-XD0X-XCX
w/IS probe circuit BR-Ex d+ib IIC T5/T4 IP66 - Probe
TXX-XHXX-XCX
Ex db Flame Proof BR-Ex d IIC T5/T4 IP66
(Zone 0 in conjunction with hermetically sealed relay: Probe must be twin tip design
and made from Hastelloy C, Monel, or 1mm thick stainless steel.)
Zone 1 Service
TXX-XXXX-XGX
Ex d Flame Proof BR-Ex d IIC T5/T4 IP66
EAC TDX-XXXX-XCX
Russian Authorisation Standards
TDX-XXXX-XGX Consult MAGNETROL for details.
CCOE TDX-XXXX-XCX
Hazardous Approvals - India
TDX-XXXX-XGX Consult MAGNETROL for details.
KGS TDX-XXXX-XCX
Hazardous Approvals - Korea
TDX-XXXX-XGX Consult MAGNETROL for details.
These units have been tested to
EN 61326 and are in compliance
with the EMC Directive 2014/30/EU.
The probes and low flow
body comply with Canadian
Electric Code requirements
of ANSI/ISA 12.27.01-2003
as a single seal device.