52
ORI-46.650 Jupiter Magnetostrictive Transmitters
ORI-46.650 Jupiter Magnetostrictive Transmitters
53
2.5
Specifications
2.5.1 Functional/Physical
System Design
Measurement Principle
Magnetostriction-based mechanical response signal
Input
Measured Variable
Level, response signal time of flight
Span
6 inches to 400 inches (15 cm to 999 cm)
Output
Type
4 to 20 mA with HART: 3.8 mA to 20.5 mA useable (per NAMUR NE43)
Foundation fieldbus
TM
: H1 (ITK Ver. 6.1.1)
Resolution Analog:
0.003 mA
Digital Display:
1 mm
Loop Resistance
591 ohms @ 24 VDC and 22 mA
Diagnostic Alarm
Selectable: 3.6 mA, 22 mA (meets requirements of NAMUR NE 43), or HOLD last output
Damping
Adjustable 0-10 seconds
User Interface
Keypad
4-button menu-driven data entry
Display
Graphic liquid crystal display
Digital Communication
HART Version 7 —with Field Communicator, Foundation fieldbus
TM
,
DTM (PACT
ware
TM
), AMS, FDT, EDDL
Menu Languages
Transmitter LCD: English, French, German, Spanish, Russian, Portuguese
HART DD: English, French, German, Spanish, Russian, Chinese, Portuguese
Foundation fieldbus
TM
Host System: English
Power
(at transmitter terminals)
HART: General Purpose (Weather proof)/Intrinsically Safe/Explosion-proof:
11 VDC minimum under certain conditions (refer to Section 2.5.5)
FOUNDATION fieldbus™: 9 to 17.5 VDC
FISCO, FNICO, Explosion Proof, General Purpose, and Weather Proof
Housing
Material
IP67/die cast aluminum A413 (<0.6% copper); optional 316 stainless steel
Net/Gross Weight
Aluminum: 4.5 lbs. (2.0 kg)
Stainless Steel: 10.0 lbs. (4.50 kg)
Overall Dimensions
H 8.34” (212 mm) x W 4.03” (102 mm) x D 7.56” (192 mm)
Cable Entry
1⁄2” NPT or M20
SIL 2 Hardware (Safety Integrity Level)
Safe Failure Fraction = 93.1% for Single Float version,
91.9% for Dual Float version (HART only)
Functional Safety to SIL 2 as 1oo1 in accordance with IEC 61508
(Full FMEDA report available upon request)
Environment
Ambient Temperature Range Transmitter:
-40°F to +176°F (-40°C to +80°C)
LCD:
-5°F to +176°F (-20°C to +80°C)
Process Temperature External Mount:
-320°F to +850°F (-195°C to +454°C)
Direct Insertion:
-320°F to +500°F (-195°C to +260°C)
-320°F to +800°F (-195°C to +427°C)
Storage Temperature
-50°F to +185°F (-46°C to +85°C)
Process Pressure (Direct Insertion)
Vacuum to 3000 psig (207bar)
See page 41 for Ambient Temperature Range based off protection method
See Special Conditions of Use Item 2 (page 42)
2
2
1
1
2.5.1 Functional/Physical
Humidity
0 to 99%, non-condensing
Electromagnetic Compatibility
Meets CE requirement (EN 61326) and NAMUR NE 21
Surge Protection
Meets CE EN 61326 (1000V)
Shock/Vibration
ANSI/ISA-S71.03 Class SA1 (Shock); ANSI/ISA-S71.03 Class VC2
(Vibration)
Performance
Linearity
0.030 in. or 0.01% of probe length, whichever is greater
Accuracy
±0.01% full scale or 0.05 in, whichever is greater
Resolution
.014” (.35 mm)
Repeatability
±0.005% of full span or 0.014 in, whichever is greater
Response Time
1 second
Initialization Time
Less than 10 seconds
Ambient Temperature Effect
Approx. ±0.02% of probe length/degree C
Foundation fieldbus
TM
ITK Version
6.1.1
H1 Device Class
Link Master (LAS)—selectable ON/OFF
H1 Profile Class
31PS, 32L
Function Blocks
(6) Al, (2) Transducer, (1) Resource, (1) Arithmetic, (1) Input Selector,
(1) Signal Characterizer, (2) PID, (1) Integrator
Quiescent Current
15 mA
Execution Time
15 msec (30 msec PID, Signal Characterizer Block)
2.5.2 Probe Selection Guide
JM4 Probe
Temperature Range
Pressure Range (Direct Insertion)
Standard
-50
°
F to 450
°
F (-46
°
C to 232
°
C)
Vacuum to 3000 psig (207 bar)
High Temperature
-50
°
F to 800
°
F (-46
°
C to 427
°
C)
Vacuum to 3000 psig (207 bar)
Cryogenic
-320
°
F to 158
°
F (-196
°
C to 70
°
C) Vacuum to 3000 psig (207 bar)
2.5.3 Probe Specifications
Probe Diameter
0.625 inches (1.59 cm)
Process Connection
3/4” NPT, 2” NPT, 1” BSP, 2” BSP
ANSI or DIN Flanges
Materials
Standard: 316 SS, nickel, Teflon
®
, brass, silicone
High Temperature: 316 SS, ceramic, brass, nickel, mica
Cryogenic: 316 SS, silicone, nickel, Teflon
®
, brass