Magnetic Autocontrol MHTM, Руководство по эксплуатации

Страница: 83 / 132

Barrier MHTM
TM
MicroDrive Access and Parking
Assembly and installation
5815,5001EN / Version 05 83
8.16 Set nesting post height
Danger of crushing
CAUTION
Crushing danger between the fork at the
nesting post and the barrier boom!
Fingers and hands can be crushed when the
barrier boom runs into the nesting post when
closing.
– Switch off power supply during assembly.
– Do not hold on to fork from the inside. Wear
safety gloves if required.
Mag00226
1
+140
–60
16 Nm
H
=
825
1
+160
–40
16 Nm
H
=
805
B A
Fig. 38: Set nesting post height (dimensions in mm)
A Nesting post
B Nesting post with lock
H Reference height
1 Torx
screws
You may set the nesting post height, e.g. to balance out level
differences in the foundations.
1. Loosen the two Torx screws until the nesting post fork can be
moved. Hold on to the fork.
2. Set the fork to the desired height.
3. Tighten the two Torx screws with 16 Nm.