Magnetic Autocontrol MHTM, Руководство по эксплуатации

Страница: 116 / 132

Barrier MHTM
TM
MicroDrive Access and Parking
Malfunctions
116 5815,5001EN / Version 05
12.3.3 Event, warning and error messages – Detector
The warning messages "FF4B" and "FF4C" are also reported
through the output function "Error".
Number Designation Possible cause Corrective action
FF4A
ERROR Hardware error Internal HW function test failed
 Perform reset.
→
See
page 117, chapter 12.4.
 Contact service if required.
FF4B
WARNING Loop error A or C Short circuit or idle loop A or C  Remove loop error and
perform adjustment.
 If no loop is connected,
select the option "Inactive"
in the menu "Detector".
FF4C
WARNING Loop error B or D Short circuit or idle loop B or D  Remove loop error and
perform adjustment.
 If no loop is connected,
select the option "Inactive"
in the menu "Detector".
Table 29: Event, warning and error messages – Detector
12.3.4 Event, warning and error messages – All modules
Number Designation Possible cause Corrective action
6010
WARNING Watchdog reset SW error Contact service if required.
8110
WARNING Bus fault Warning Contact service if required.
8120
WARNING Bus HW fault Warning  Check DIP switch next to
service interface (position
ON)
 Remove devices at service
interface if required.
Table 30: Warning and interference messages – All modules