Magnetek IMPULSE VG+ Series 3, Инструкция по эксплуатации, Страница: 172 / 183

IMPULSE•VG+ Series 3 Instruction Manual – 07/25/05
A-3
IMPULSE•VG+ Series 3 Parameter Listing
No. Parameter Name. Factory Ref Page#.
A1-01 Access Level 2 4-9
A1-02 Control Method 3 4-9
A1-03 Motion 0 or 2 4-10
A1-04 Speed Ref 1 4-10
A1-05 Initialize Parameters 0 4-14
A1-06 Password 1 0 4-14
A1-07 Select Password 1 0 4-14
A2-01 to A2-32 User Parameters --- 4-14
B1-01 Reference 1 15 5-3
B1-02 Reference 2 30 5-3
B1-03 Reference 3 60 5-3
B1-04 Reference 4 45 5-3
B1-05 Reference 5 60 5-3
B1-06 Reference 6 0.0 5-3
B1-07 Reference 7 0.0 5-3
B1-08 Reference 8 0.0 5-3
B1-09 Reference 9 0.0 5-3
B1-10 Reference 10 0.0 5-3
B1-11 Reference 11 0.0 5-3
B1-12 Reference 12 0.0 5-3
B1-13 Reference 13 0.0 5-3
B1-14 Reference 14 0.0 5-3
B1-15 Reference 15 0.0 5-3
B1-16 Reference 16 0.0 5-3
B1-17 Jog Reference 6.00 5-3
B1-18 Ref Priority 0 5-3
B2-01 Ref Upper Limit 100.0 5-5
B2-02 Ref Lower Limit 4.0 5-5
B2-03 Ref 1 Lower Limit 2.0 5-5
B2-04 Alt Upper Limit 100.0 5-5
B3-01 Reference Source 1 5-6
B3-02 Run Source 1 5-6
B3-03 Stopping Method * 5-7
B3-04 Reverse Motor Direction 0 5-9
B3-05 Zero-Speed Operation 0 5-9
B3-06 Control Input Scans 1 5-10
B3-07 Local/Remote Run Select 0 5-10
B3-08 Run Command at Program 0 5-10
B3-10 Allow Run at Power Up 0 5-10
B4-01 MOP Ref Memory 0 5-10
B4-02 Trim Control Level 10 5-11
B5-01 Acceleration Time 1 5.0 5-12