Magnetek FLEX M Series, Руководство пользователя

Страница: 30 / 34

Enrange Flex M Pre-Engineered Modular Receiver Manual
October 2014
Page 27 of 31
6.0 CHANNEL CONFIGURATION SETTINGS (BANK 2 ON RF/CPU MODULE)
NOTE: See Section 2.4 for instructions on how to remove the CPU/RF module from the Din rail and how
to remove the PCB from the module housing.
6.1 FCC STATEMENTS
Compliance Statement (Part 15.19)
This device complies with Part 15 of FCC
rules.
Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any
interference received, including
interference that may cause
undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly
approved by the party responsible for
compliance should void the user’s
authority to operate the equipment.
This portable transmitter with its antenna
complies with FCC’s RF exposure limits for
general population/uncontrolled exposure.