![background image](http://html1.mh-extra.com/html/magnetek/flex-m-series/flex-m-series_manual_3584862026.webp)
Enrange Flex M Pre-Engineered Modular Receiver Manual
October 2014
Page 23 of 31
5.3 FLEX M-32 SYSTEM OVERVIEW
FlexM-32
32 output Flex M system with 120VAC power card, RF/CPU card, and
four 8 output relay cards.
To enable the tandem mode operation in the receiver, dip switch 1-8 needs to be set to the UP position.
When tandem mode operation is enabled, the Motion 3 paddle lever will operate both the Main Hoist
(Motion 3) output and the Aux Hoist (Motion 4) output when the rotary switch on the transmitter is in the
tandem position. The Motion 4 paddle lever will be disabled when the rotary switch on the transmitter is
in the tandem position. Relay output R4-5 is based solely upon the rotary position on the transmitter and
will not be impacted by setting dip switch 1-8 to the DOWN position.
5.3.1 Flex M 32 Relay Configuration Settings (Bank 1 on RF/CPU Module)
Содержание FLEX M Series
