Enrange Flex EM/EX Instruction Manual
April 2019
Page 19 of 19
8. DECLARATION OF CONFORMITY
EU Declaration of Conformity Certificate
For the following equipment:
Product
: Flex Series Radio Remote Control
Multiple Listee Model No.
: Flex 4ES/EX/EM, Flex 6EX, Flex 8ES/EX/EM, Flex 12ES/EX/EM, Flex 8/12 PRO
Product Receiver Models
: CAN-2, MHR, WIC-2402, Flex 4 RX, Flex 6 RX, Flex 8R X, Flex 12 RX
Transmitter Model Serial Number :
Receiver Model Seral Number
:
Manufacturer
’
s Name
: Magnetek, Inc.
Manufacturer
’
s Address
: N49 W13650 Campbell Drive
Menomonee Falls, WI 53051
USA
The undersigned hereby declares on behalf of Magnetek, that the above-referenced products, to which this declaration rela tes, is in
conformity with the provisions of CE Mark Directive (93/68/EEC), Machinery Safety Directive (MD, 2006/42/EC), Radio Equipment
Directive (RED, 2014/53/EU), EMC Directive (2014/30/EU), and the ROHS2 Directive (2011/65/EU).
The standards relevant for the evaluation of the product referenced above conformity to the directive requirements are as
follows:
EN 301 489-3 v1.4.1:2002-04
EN 301 489-17 v2.1.1:2009-05
EN 300 328 v2.1.1:2016-11
EN 300 220-1 v2.3.1:2010
EN 300 220-2 v2.3.1:2010
EN 60529:1992
EN 12100:2010
EN ISO 13849-1:2008
EN ISO 13849-2:2012
EN 13557:2003+A2:2008
The European contact for Magnetek is:
Brian Preston
Magnetek
Unit 3, Bedford Business Centre
Mile Road
Bedford
MK42 9TW
United Kingdom
Per Annex II.B of the Machinery Directive (2006/42/EC):
The machinery, product, as sembly or sub-assembly covered by this Declaration of Conformity must not be put into service until the
machinery into which it is to be incorpora ted has been declared in conformity with the provisions of the appli cable Directive(s). This
sta tement is only necessary where the product is to be incorporated into a machine or system (e.g. a safety component).
Signature of Authorized Person:
Engineering Development Manager
Columbus McKinnon Corporation
Director of Development
Columbus McKinnon Corporation
