Enrange Flex EM/EX Instruction Manual
April 2019
Page 7 of 19
2.3 SAFEY INFORMATION & RECOMMENDED TRAINING FOR
OPERATORS
Anyone being trained to operate radio controlled equipment should possess as a minimum the following
knowledge and skills before using the radio controlled equipment.
The operator should:
•
Have knowledge of hazards pertaining to equipment operation
•
Have knowledge of safety rules for radio controlled equipment
•
Have the ability to judge distance of moving objects
•
Know how to properly test prior to operation
•
Be trained in the safe operation of the radio control system as it pertains to the equipment being
operated
•
Have knowledge of the use of equipment warning lights and alarms
•
Have knowledge of the proper storage space for a radio control transmitter when not in use
•
Be trained in transferring a radio control transmitter to another person
•
Be trained how and when to report unsafe or unusual operating conditions
•
Test the radio control system emergency stop and all warning devices prior to operation; testing
should be done on each shift, without a load
•
Be thoroughly trained and knowledgeable in proper and safe operation of the equipment that
utilizes the radio control
•
K
now how to keep the operator and other people clear of lifted loads and to avoid “pinch” points
•
Continuously watch and monitor status of lifted loads
•
Know and follow cable and hook inspection procedures
•
Know and follow the local lockout and tagout procedures when servicing radio controlled
equipment
•
Know and follow all applicable operating and maintenance manuals, safety procedures,
regulatory requirements, and industry standards and codes
The operator shall not:
•
Lift or move more than the rated load
•
Operate the material handling equipment if the direction of travel or function engaged does not
agree with what is indicated on the controller
•
Use the crane, hoist or lifting device to lift, support or transport people
•
Lift or carry any loads over people
•
Operate the crane, hoist or lifting device unless all persons, including the operator, are and
remain clear of the supported load and any potential pinch points
•
Operate a crane, hoist, or lifting device when the device is not centered over the load
•
Operate a crane, hoist, or lifting device if the chain or wire rope is not seated properly in the
sprockets, drum or sheave
•
Operate any damaged or malfunctioning crane, hoist, lifting device or other material handling
equipment
•
Change any settings or controls without authorization and proper training
•
Remove or obscure any warning or safety labels or tags
