Magnescale LY71, Инструкция по эксплуатации

Страница: 32 / 44

2-4
(E)
LY71
2. Applied Operation
2-6. Pausing Updates of Display Data (Latch)
If you prefer to read selected position data without pausing the calculation itself, updating of the display
only can be paused.
1
Select in the Hold setting.
➔
Installation manual “4-3. Advanced Settings” (Hold function)
2
Press the key.
........ Updating of the display data is paused. (The lamp lights on.)
Restarting
Press the key. (The lamp lights off.)
∗
Pause can be performed by input from an external signal.
2-7. Changing the Display Scale
This sets the count display magnification. This is effective for situations such as when measuring an object
where the scale was changed.
➔
Installation manual “4-3. Advanced Settings” (Scaling)
2-8. Reducing Flickering of the Minimum Digit
If the number for the minimum digit of the display value is unstable and difficult to check, flickering of the
display can be reduced.
➔
Installation manual “4-3. Advanced Settings” (Flicker control)
2-9. Disabling Key Operation (Preventing Accidental Operation)
This locks key operation to prevent unintended operations.
➔
Installation manual “4-3. Advanced Settings” (Key lock)
After making the setting, the only valid key operations are the (Standby) key and key.
A password must be entered to remove the key lock. Pressing the key displays the password input
display.
➔
Installation manual “4-3-9. Key Lock”