MAGNATECH Pipemaster 515, Инструкция по эксплуатации и техническому обслуживанию, Страница: 52 / 101

48
12.5 Transfer Print Files to Data Key
The Data Key can be used to transfer or move files to a standard PC equipped with a printer,
for subsequent printout. Select the Weld Number to Transfer, and use the Encoder to select
Print to Memory, Print, or Both. Press Print Soft Key. A screen will then state that the weld
has been successfully saved to Memory. One or more welds can be stored for subsequent
printing. (A Data Key does not have to be installed at this time.)
To Transfer a Weld Program from internal memory to a Data Key, install a Data Key in the
USB connector at top of Pendant.
The Data Key will require approximately 1 minute to initialize at which time, the LED on the
side of the key will slowly pulse. When it is ready, it will blink rapidly 5 times. If no Data Key
is installed, or it has not yet finished initializing, an Error message will appear on the display.
Press the Dnload Soft Key to download all stored print files to the Data Key.
ATTENTION : Dnload will delete these programs from memory.
The Data Key print files can be opened up in any text editor, such as Microsoft Word,
Microsoft Notepad, or Excel.
ATTENTION : If an Error message is showing, you must return to the Main Menu, and re-
enter the print screen. “Error” will change to “Dnload”. If the Data Key is
installed and initialized prior to entering the Printscreen, this step will not be
required.
12.6 QC Settings and Printout
Available for C-Heads Only - Not Available for Other Models. Contact Magnatech for
operating instructions if a C-Head is used on a Pipemaster and QC is to be used.