MAGNATECH Pipemaster 515, Инструкция по эксплуатации и техническому обслуживанию, Страница: 28 / 101

24
6.0
MAIN MENU
6.1 Start-up
When first powered up, the main display will remain off except for backlighting. After 12
seconds the model, S/N, software release date, and last calibration date will appear on the
display.
6.2 Main Screen/Main Menu
Three keys allow access to:
•
Library = Access to Library of existing procedures
•
Menu = Provides access to various functions and system configuration
•
New = Create a new weld program
•
Help = Assistance
6.2.1 Press Library Soft Key
Programs are listed. Use up/down cursor to scroll through programs. Select
program using “Select” soft key. The following choices are displayed:
Weld Number XX
•
Run
•
Review Parameters
•
Review Notes
•
Edit Weld
•
Scale Weld
•
Copy Weld
•
Delete Weld
•
Print Weld
Once again, scroll through the list. Select the desired choice.
6.2.2 Press Help Soft Key
This will provide explanation or assistance on item highlighted by the cursor.
6.2.3 Press Menu Soft Key
Use the up/down cursor and select various software accessories:
Maintenance Menu
•
Copy Welds
•
Delete Welds
•
Print Welds
•
QC Set-Up
•
Tungsten Calc
•
Options
•
Weld Head Options