Magna Telemotive blue PiraT Remote Скачать руководство пользователя страница 19

Страница: 19 / 82

Remote Control Touch / blue PiraT Re-

mote

User Guide

Datum:14.12.2018

Seite 19 von 82

RCTouch_UserGuide_V3.4.1.doc

5.3 Accessories

The

Remote Control Touch

is supplied with a power cable with LEMO connector to banana

plug (length: ~ 1,5 m).

The

blue PiraT Remote

is connected by a 26-pol SUB-D connector to the device and has the

cables for the available interfaces integrated in the cable set.

Additional accessories are available for purchase. The following accessories are compatible:



mounting bracket



various adapter cables

Please contact our sales department for more information about the accessories.

5.4 Installation

The

Remote Control Touch

and

blue

PiraT Remote

require a connection to the power supply

and one to the client computer.

In order to make full use of all functions of the Remote Control Touch, a connection to at least
one blue PiraT data logger is required. This creates a

elemotive

ystem

ink (

TSL

Find more information about client and TSL in the

User manual for the Telemotive System

Client

5.4.1 Cable connection

Note:
Connect the Remote Control Touch and blue PiraT Remote only with devices of Telemo-
tive AG (blue PiraT2, blue PiraT Mini, Remote Control).

Note:
Make sure that the devices are switched off before disconnecting it from power supply.

Содержание Telemotive blue PiraT Remote



















































































Результаты поиска

Содержание Telemotive blue PiraT Remote

Отзывы:

Похожие инструкции для Telemotive blue PiraT Remote

Бренды по названию

Популярные бренды

Magna Telemotive blue PiraT Remote, Руководство пользователя

Результаты поиска

Содержание Telemotive blue PiraT Remote

Отзывы:

Похожие инструкции для Telemotive blue PiraT Remote

Бренды по названию

Популярные бренды