Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 14 von 82
RCTouch_UserGuide_V3.4.1.doc
5.2 Functionality of connectors and operating elements
The functionality of connectors and operating elements is impaired by certain conditions such
as moisture, darkness, heat or cold, mechanical action, dirt or similar.
Observe therefore the points described in chapter 8 Maintenance provisions, safety regulations.
5.2.1 Ports
The ports are used to connecting the devices, for example with the power supply.
Port
Cable
Connection w
ith …
No. Designation
1
8-pol LEMO socket
(RCTouch only)
Power cable with LEMO connector to
banana plug
Power source
2
26 pol SUB-D
(bP Remote only)
Power source
interfaces
3
2x Gbit Ethernet (RJ45) Gbit Ethernet cable
Client computer or
data logger
4
SD card slot
(bP Remote only)
Logging data
5
Micro-USB 2.0
Micro-USB connecting cable
USB devices
6
4-pol audio jack plug
stereo out/microphone
(3.5 mm) OMTP
(CTIA does NOT work!)
3.5" jack/audio cable
Microphone, speak-
er, headset, etc.
Table 5.1: Available connections
5.2.2 Brightness sensor
The brightness sensor helps adjust the
screen’s backlight depending on the ambient light. It
serves only the automatic regulation and is permanently active, for switching the display if nec-
essary.
5.2.2.1
Night mode
If the environment is too dark, the devices automatically switches into night mode. In this view,
the surface is displayed in modified colors, so that the driver is not blinded. The night mode will
be activated if you drive into a tunnel for example.
5.2.3 Home button
The Home button is used to:
switching the device on or off,
switching to the
[Home]
screen
