Magna-Matic MAG-8000-7, Руководство по эксплуатации

Страница: 2 / 12

1
Instructions given with this symbol are for personal safety. Be
sure you and your employees follow them. A careful operator is
the best insurance against accidents.
Before handling any equipment read and understand the instruc-
tions.
When using electric tools, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
personal injury including the following.
1. Grounding Instructions - This tool must be grounded while
in use to protect the oper-ator from electric shock. The tool
is equipped with an approved three conductor cord and three
prong grounding type plug to fit the proper grounding type recep-
tacle. The green (or green and yellow) wire is the grounding
wire.
2. Extension Cords - Use only three wire extension cords
which have three prong grounding type plugs and three pole
receptacles which accepts the tool’s plug. Replace or repair
damaged cords.
THE SAFE WAY IS THE
ONLY WAY TO GRIND!
3. Keep Work Area Clean - Cluttered areas and benches invite
accidents.
4. Consider Working Enviroment - Don’t use power tools in
damp or wet locations. Keep work area well lit. Don’t expose
power tools to rain. Do not use tool in presence of flammable
liquids or gases.
5. Keep Childern Away - All visitors should be kept a safe
distance form the work area. Do not let visi-tors have contact with
the tool or the extension cord.
6. Store Idle Tools - When not in use, tools should be stored in
dry, high or locked-up places out of reach of children.
7. Don’t Force Tool - It will do the job better and safer at the rate
for which it was designed.
WARNING