Magna-Matic MAG-8000-7, Руководство по эксплуатации

Страница: 3 / 12

2
8. Don’t Over-Reach - Keep proper footing and balance at all
times.
9. Wear Proper Apparel - Do not wear loose clothing or jewelry
that can get caught in moving parts. Rubber gloves and non-skid
foot wear are recommended when working outdoors. Wear pro-
tective hair covering to contain long hair.
10. Use Safety Glasses - Also face or dust mask-wrap around
goggles.
11. Don’t Abuse Cord - Never carry tool by cord or yank it to
disconnect from receptacle. Keep cord from heat, oil, and sharp
edges.
12. Disconnect Tool - When not in use; before servicing; when
changing grinding wheel.
13. Avoid Accidental Starting - Don’t carry plugged in tool. Be
sure switch is off when plugging in.
14. Grinding Wheels - Use only grinding wheels having a
maximum operating speed of 5500 RPM. KEEP GUARDS IN
PLACE.
15. Guard Against Electrical Shock - Prevent body contact with
grounded surface. For example: pipes, radiators, etc.
16. Stay Alert - Watch what you are doing. Use common sense.
Do not operate tool when you are tired, or under the influence of
any drugs or alcohol.
17. Check Damaged Parts - Before further use of the tool, a
guard or other part that is damaged should be carefully checked
to determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, breakage of parts,
mounting and any other condition that effect its operation. All
parts should be properly repaired or replaced. Do not use this
tool if the switch does not turn it on or off.
18. Never Leave Tool Unattended - Turn the power off. Don’t
leave the tool until it comes to a complete stop.
19. Replace Cracked Wheels Immediately.
20. Read - the enclosed A Primer on Grinding Wheel Safety
(Norton Publication)
21. Never attach the provided spanner wrench or any other
object to the grinder.