EN
www.magmaweld.com
12
USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
RS 350 M / MW PRO - RS 450 M / MW PRO - RS 550 M / MW PRO
TECHNICAL INFORMATION
1.1 General Information
RS 350 M / MW PRO, RS 450 M / MW PRO and RS 550 M / MW PRO are 3-phase, step-voltage controlled MIG / MAG welding machines with horizontal
characteristics, aimed for use in series production and construction and which that can weld solid and cored wires. The welding voltage can be adjusted
through the panel in front of the machine and the wire feed speed can be set from the panel in front of the wire feeder. Welding voltage and current
can be monitored via digital display. The optimum welding parameters can be selected from the table in the front panel in the wire feed unit. A 24V
electrical socket for the integrated gas tube platform and C02 gas heater are available. It is cooled by the fan and has protection against overheating.
1.2 Machine Components
Figure 1 : RS 350 / 450 / 550 M PRO
Front View
Figure 2 : RS 350 / 450 / 550 M PRO
Rear View
1-
Wire Speed Welding Current Indicator
11-
Handle
2-
Torch Connector
12-
On/Off Switch
3-
Fine (Voltage) Adjustment Switch
13-
Ground Cable Socket (-)
4-
Coarse (Voltage) Setting Switch
14-
Wheel
5-
Welding Current Plug Socket WF Connection
15-
Gas Cylinder Fixing Chain
6-
Wire Feed Unit Connector
16-
CO2 Heater Outlet (24 VAC)
7-
Gas Outlet Connection
17-
Gas Inlet
8-
Set / Source Voltage Indicator
18-
Fan Outlet
9-
Adjustment Knob
19-
Gas Cylinder Transport Platform
10-
Rotating Apparatus
Technical Information
