Magmaweld RD 650 MW, Руководство пользователя

Страница: 16 / 60

16
www.magmaweld.com USER MANUAL | KULLANIM KILAVUZU
EN
RD 650 MW
2.4.3 Water Cooling Unit
• The water cooling unit is used to cool the torch; It is a closed circuit system consisting of radiator, fan, pump
coolant reservoir.
• Connect the cold (blue) water hose to the cold water outlet on the water cooling system, and the hot (red)
water hose to the hot water inlet on the water cooling system.
• Magmaweld welding machines come with Magmaweld coolant, which is produced to give the best
performance. In case of lack of coolant, open the coolant reservoir cap and add Magmaweld coolant suitable
for the temperature of the working environment. The coolant must be within the minimum and maximum
values shown on the front panel of the unit.
• Different coolant or water should not be added. Different liquid additives can cause chemical reactions or
different problems. Magmaweld is not responsible for the risks that may arise in case of adding different
liquids.
• All warranty provisions will be void if different coolant or water is added to the Magmaweld coolant.
• If it is desired to use a different brand of coolant, the inside of the coolant tank should be completely empty
and there should be no residue or liquid in it.
• It is not suitable to use the water-cooling units with welding machines other than manufactured by Magma
Mekatronik Makine ve Sanayi Ticaret A.Ş. Water cooling units cannot be operated with external supply
Installation