8
DLP
External Control Panel
LED Indicator
Indicates the state of the projector.
Control Panel Button
Turns the projector (or lamp) ON or OFF.
MENU
Displays (or hides) the on-screen control menus.
AUTO
Automatically adjusts frequency and phase in VGA mode.
SOURCE
Manually selects an input source.
Cursor Controller
It can be used as a navigation controller to navigate
( / / / )
the projector menus.
Scrolls up through the menu choices.
Scrolls down through the menu choices.
Increases the value setting on the selected sub-menus,
or confirms a menu selection.
Decreases the value setting on the selected sub-menus.
Note:
The Infrared Remote Receiver (Front and Rear) allows the projector to accept signals
from the remote control. For best results, be sure to aim the control toward the sensor
without any obstructions between the two, and at an operative distance.
