background image

You can exit Valet Mode only by pressing buttons  

simultaneously.

To arm the vehicle, press the        button .
To disarm the vehicle, press the         button. 
If pressing the arm/disarm buttons does not arm/disarm the vehicle, you will need to
release the button and try again, as the remote stops transmitting as soon as the
LED stops flashing.
Press the                   buttons for a 0.5 second to mute the vehicle siren when 
arming or disarming your vehicle.  Keep in mind that your siren will still be activated
for all other modes(i.e.panic or alarm trigger) regardless of whether or not your siren
is in mute mode.  The siren will be mute only when arming or disarming your vehicle.

When the alarm is armed, the starter kill function (an optional feature provided by
your installer) is activated.  This feature disengages the starter mechanism on your
vehicle and prevents it from starting, even with a key.

To lock the vehicle, pressing the       button for a 0.5 second. 
To unlock the vehicle, press the       button for a 0.5 second.  If the pressing of the
lock/unlock buttons does not lock/unlock the doors, you will need to release the
button and try again, as the remote stops transmitting as soon as the LED stops
flashing.  If the        button is pressed for 2 seconds, it will panic the system.

Page 7

Keyless  Entry

Alarm  Mode

Page 6

Within a 7 second period after cycling the ignition for the 3

rd 

time,

Press the        button for a 0.5 second. The parking lights will flash 
once to confirm that the transmitter has been programmed.  
You can continue programming additional remotes.  The parking lights 
will flash two times when the programming mode has expired.

If you lose your remote after you have armed the vehicle, use your key 

to open the door.  The siren will go off.  Turn the ignition on and off, 
3 times with your key to shut down the alarm and put the system into 
valet mode.  You can cancel valet mode with a remote later on. 
See: Valet mode, on page 7.

Trunk  Release

Press the            button for 2 seconds, in order to unlock and release your trunk door.  
If pressing the trunk release button does not release the trunk, you will need to
release the button and try again, as the remote stops transmitting as soon as the
LED stops flashing.Note that the trunk release function will not only release the trunk
but will unlock the all doors as well.

Panic  Mode  

If 

Anti-Jacking

option has been programmed (ask your dealer if you  would

like to have this option) and the Ignition-Kill has been installed , Panic 
Mode works as Anti-Jacking if the car key in the ignition. In Anti-Jacking
mode is activated while key is in the ignition,

a) the Siren will go off for 1.5 minutes, and  b) Ignition-Kill will be activated 

after the first 30 seconds.  This is to give a 30 second warning to the 
hijacker, then to disconnect the ignition to stop the vehicle.

Press the         button for 2 seconds to enter Panic Mode.  In this mode, the car will be
armed,if not armed already, and the siren will be activated and the parking lights will be
flashed. In order to disengage Panic Mode, press the        button.
Then, press the         button for a 0.5 second to unlock/ disarm your vehicle.  

Valet  Mode 

While the vehicle is in valet mode, the only feature is the keyless entry and optional auxiliary
functions.

In order to enter Valet mode, press the                        buttons simultaneously for a 0.5 sec-
ond.  In order to manually enter Valet Mode, insert your car key into the ignition and turn the
ignition on and off 

three times within 7 seconds

Содержание M861A











Отзывы: