background image

The model name, R500 stands for 

Safety Information 

Please take these safety precautions into consideration, under the following conditions :  

Page 4

When servicing your automobile (i.e. changing the oil, washing your car), the  
Magicar system should be in Valet Mode. 

Whenever you loan your vehicle to an individual who is not familiar with  Magicar, 
please put the vehicle in Valet mode.  This will prevent the vehicle barrower from 
accidentally activating the  Magicar auto-security system.  

Remote 

Page 5

Remote Button Functions

1

2

3

4

5

6

7

8

9

10

Lock

0.5 sec

0.5 sec

0.5 sec

0.5 sec

Unlock

Button

Press

Function

2 sec

Panic, Press Lock to shut off Siren 

Valet Mode - on/off

Siren Chirps for Lock /Unlock - on/off

0.5 sec

Ignition Lock - on/off

0.5 sec

Passive Arming - on/off

0.5 sec

Shock Sensor - on/off

2 sec

Trunk Release

2 sec

Programming Menu - Installer Only

Means pressing the button for 2 seconds.

Means simultaneously pressing the buttons.

Means simultaneously pressing the buttons for 2 seconds.

Remote Learning Routine

The Magicar will allow up to three remotes to be programmed to one vehicle.
Please perform the following procedure to add or reprogram additional remotes.

Activate Valet/ Programming mode by manually 

turning the ignition on and off three times 

with the key within a 7 second period.

The parking lights will flash once with successful completion of 
this step.

Содержание M861A











Отзывы: