background image

Press button                  for 2 seconds (The siren and signal lights will chirp  

one time each)

Press button       three times (The siren and signal lights will chirp and flash  

one time whenever press button       ) and wait for 5 seconds.

You can only program one option at a time. You will have to repeat the procedure for
every option you would like to change.

Press buttons                  for 2 seconds.  The siren and signal lights 

will chirp and flash one time each. 
- If you fail to program, the siren and signal lights will chirp and flash

three times each.

Press button      the number of times to go to the option number you 
want to change.

- The siren and signal lights will chirp and flash one time whenever 

you press button      .   

Wait a few seconds. You will hear a number of chirps and see a number

of parking light flashes corresponding to the option number you want 
to change. If the number of chirps or flashes does not match the option         
number you want, wait 10 seconds, then start over at step 1.

Press button       or      as you want to program the option.  

- If you press button       , the option will be set to the default setting.  

The siren and signal lights will chirp and flash one time each.  

- If you press button      , the option will be set to the optional setting.          

The siren and signal lights will chirp and flash two times each.  

The siren and signal lights will chirp and flash three times after 5 seconds

Press button       after confirmation of the siren and signal lights as no. 3 

(The siren and signal lights will chirp and flash two times each.)

Page 18

How to set Options

+

Page 19

Canceling (Going to factory default) Option Mode

Press buttons                  for 2 seconds (The siren and signal lights will 

chirp and flash one time each).
- If you fail to program, the siren and lights will chirp and flash three 

times each.

Press button        three times. (The siren and signal lights will chirp and 

flash once time the button is pressed.)

All options will be reset to factory defaults after the confirming 3 chirps 
and flashes. 

Confirmation of  Wrong Programming

When you press the buttons incorrectly, Option Mode will not be programmed 
and the siren will activate for 1 second.  

+

+

Содержание M861A











Отзывы: