Page 16
Options Mode
Press buttons and Simultaneously for 2 seconds in order to enter
Option Mode.
Note :
"1. Door Lock/Unlock Pulse Duration :
If you set this mode, Door Lock/Unlock Pulse Duration wil be changed 0.8 second
to 4 seconds.
2. Start Kill Mode
Anti-Jacking(Ignition-Kill) :
The #2 wire of CON3 can be programmed to send a signal to a relay to disconnect
the ignition wire of the vehicle anytime the vehicle is armed so that the vehicle cannot
start or run by remote or key. The vehicle can also be shut off with remote by use of
the panic command, even if it is running with a key in the ignition.
Srarter-Kill :
The #2 wire of CON3 can be programmed to send a signal to a relay to disconnect
the srarter wire of the vehicle upon arming.
3. Parking Light Flashing :
With this option, the parking lights will flash if any door remains open while the vehi-
cle is disarmed.
Door Lock/Unlock Pulse Duration
Application of Pre-wired Kill Relay
Flashing Parking Light During Door Open
0.8 Sec
Starter Kill
Disabled
4 Sec
Anti-jacking (IG-kill)
Activated
Features
(Factory Default)
Programming Menu Option
C0N4
No 1
(Black) : GND
No 2
(Black/White) : (+)LED
C0N 5
Antenna
LED Ass y
No 1
(Black) : GND
No 2
(White) : (-)and stage shock Input
No 3
(Red) : (+12)
No 4
(Yellow) :(-)1st stage shock Input
Page 17
Dual stage shock sensor
No7
(Black /White) : (-) Input for optional Sensor
When installing additional sensors, use this wire as the input wire for those sensors.
Always remember, when attaching more than one sensor to any input, you must diode iso-
late them so that they don’t backfeed into each other.
When Magicar systems are installed, please pay attention to stretch out the wire of
antenna. If the wire is bended or twisted seriously, it will be one of the reasons,
which will reduce the receiving range.
Antenna Module
FCC ID: O44J1WAMLEDANT