Magic Chef CER3725AGW, Сервисная инструкция

Страница: 18 / 33

18 16026839
© 2006 Maytag Services
WARNING
!
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing,
unless testing requires power.
Disassembly Procedures
Oven Light Assembly
Oven Light Bulb/Oven Light Socket
1. Remove power from unit (at the circuit breaker).
2. Open oven door and remove oven racks.
3. Hold lamp cover in place, and slide retaining wire off
cover.
NOTE: Cover will fall if not held in place when removing
retaining wire.
4. Unscrew lamp and remove.
5. Gently pry retaining clips inward towards center of
socket.
6. Once retaining clips are released, gently pull socket
into oven cavity.
7. Label and disconnect wire terminal connections and
remove socket.
8. Reverse procedure to reassemble.
NOTE: Reposition fiberglass insulation around oven
light socket to eliminate possibility of heat
related problems.
Lamp
(40 watts)
Lamp
Socket
Retaining Clip
Retaining Clip
Lamp
Cover
Lamp and Socket
Door Disassembly
1. Remove oven door, see "Oven Door Removal"
procedure.
2. Place door on a protected surface.
3. Remove screws securing door panel to door lining
and remove door panel.
4. Remove screws securing outer door glass support to
door baffle.
5. Remove outer door glass and place in a protected
area.
6. Remove screws securing door baffle to door lining
and remove door baffle.
7. Remove door insulation.
8. Remove inner door glass and place in a protected
area.
NOTE: Proceed with the following steps for door handle
removal.
9. Remove screws securing door handle to door panel
and remove door handle.
10. Reverse procedures to reassemble.
Oven Door Disassembly