Maggi 16271400, Руководство по эксплуатации и обслуживанию

Страница: 33 / 62

Pag. 26
B
A
C
Lubricate the boring-head until it’s hot so that the grease inside the head is more fluid
1. Unscrew the grease-fitting cap (A)
2. Fill the grease gun with grease type EP 2
3. Insert the gun coupler inside the grease-fitting (B) and pump a little amount of grease inside the head
4. Switch on the machine and let the spindles turn so that the grease is homogeneously spread within
the head
5. Switch off the machine
6. Verify that some grease has leaked out of the hole (C); if not, please, repeat the whole procedure
once again and until the grease is leaking out
Lubrication of the boring-head unit should be carried out every 5,000 operating hours.