Maggi 16271400, Руководство по эксплуатации и обслуживанию

Страница: 9 / 62

3.1 APPLICABLE TOOLS

Bits for quick change spindles

10 mm. L=20 mm fig. A

You can use bits up to

40 mm out of the comb fig. B
ANY ADULTERATION OR REMOVAL OF SAFETY PROTECTION DEVICES CAN CAUSE SEVERE DAMAGE. ANY
REMOVAL, EXCLUSION OR MODIFICATION OF THESE DEVICES IS STRICTLY FORBIDDEN. YOU MUST VERIFY
AND GUARANTEE THE PERFECT RUNNING OF SAFETY DEVICES BY MEANS OF PERIODIC CHECKS. ANY DE-
FECT OR PROBABLE DRAWBACK MUST BE IMMEDIATELY RESOLVED.
3. MACHINE DESCRIPTION
Our boring machines have been manufactured to make holes on wood at a fixed distance of 32 mm (with maxi-
mum accuracy) between each centre.
The head has its fulcrum on the machine table and it can be tilted up to a 90-degree angle. The operator place
the work piece on the working table, does some adjustments by using the pedal control, block the piece using
the clamp units and then start drilling.
The machine consists of:
1. a steel frame structure
2. one head group equipped with its trasmission system
3. clamp group for vertical blocking of the work piece
4. pneumatic system for head positioning and head feed
5. reference stops to obtain the same drilling distance from vertical to horizontal position
6. leaflet for positioning the spindle height, a mechanical counter and the “Spiral System” device ti regulate
the hole depth from 0 mm to 65 mm
Fig. A Fig. B
Pag. 2
WOODWORKING MACHINERY CAN BE DANGEROUS
2. OPERATION NOTES

For a safe and correct use of the machine, please read and follow the instructions in this manual.

The machine should be used only by adult qualified staff. The safety responsible should make sure that
the person assigned to use the machine has properly read and understood the information in this ma-
nual.

The staff performing the maintenance operations (both routine and extraordinary maintenance opera-
tions) should have proper mechanical and electrical training.

Stay away from any moving part of the machine.
Do not touch the spindles and/or relative moving parts.

Never overlap the pieces to be processed. Always drill one piece at a time, only after properly adjusting
the machine.
1
2
3
5
6
4