52
Enter the name of the waypoint
By default, the name of the new waypoint is Mark#### (where #### is an
automatically assigned, incremented number). To change the name,
select the Name window using the
button and push Enter. When
amending a letter in the default name, all the subsequent letters are
automatically cleared. Enter the name of your waypoint (8 characters
maximum) using the alphanumeric keypad and push Enter.
If there is already a waypoint with the same name, when you save it a
message asks you to confirm that you want to overwrite it. If the already
existing waypoint is active or used in a route, you cannot overwrite it.
Note:
To type a letter, hold down the corresponding button. (For
example, if you hold the 2 button down, the letters a, b and then c
will appear.) Once you have typed the letter or number, the cursor
automatically advances to the next space. If you make a mistake,
use the
and
buttons on the to backspace or move the
cursor ahead. Use the
and
buttons on the to return to the
previous line or to advance to the next line.
Selecting an Icon
To modify the default icon, select the Icon window using the
button and
push Enter. Select an icon to assign to your waypoint and enter your
choice by pushing Enter.
Entering Coordinates
Select the Coordinates window using the
button and push Enter. Enter
the coordinates of your new waypoint and push Enter.
See Position Menu to select the system of coordinates.
Note:
To choose North or South latitude, use the 6(M
N
O) button for
North and the 7(PR
S
) button for South. To choose East or West
longitude. Use the 3(D
E
F) button for East and the 9(
W
XY) button
for West.
