-15-
2.3 Technical data
Cutting depth
305 mm (12 in.)
Roller diameter
205 mm (8 1/16 in.)
Saw band width
6 - 8 mm (15/64 – 5/16 in.)
Saw band length
1752 mm (69 in.)
Saw band gauge max.
0.65 mm (1/32 in.)
Band pivoting
30°
Idling speed
1550 - 650 rpm
Cutting speed when idle
16.6 – 6.9 m/s (54.4 – 22.6 ft/sec)
Hose connector diameter
35 mm (1 3/8 in.)
Weight without mains cable
13,6 kg (29.9 lbs)
Universal motor with radio and television
interference
230 V~, 50 Hz
Input power continuous operation
2250 W
Current at nominal load
10 A
2.4 Noise emission specifications
Noise emission values determined according to EN 60745-1:
Sound power level
Workplace-related emission value
Idling
99 dB (A)
88 dB (A)
The noise measurements were conducted using the band saw blades included in the delivery specification.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.
2.5 Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s
2
.
2.6 Scope of supply
Portable band saw Z 5 Ec complete with:
1 saw band, coarse 8 mm (5/16 in.), serrated
1 saw band, coarse 6 mm (15/64 in.)
1 saw band, coarse 8 mm (5/16 in.)
1 handle cpl.
1 adapter
1 operating manual
1 folder “Safety Instructions”
