-20-
7 Troubleshooting
Danger
Determining the causes for existing defects and eliminating these always
requires increased attention and caution. Unplug the rechargeable battery
beforehand!
Some of the most frequent defects and their causes are listed in the following chart. In case of other defects,
contact your dealer or the MAFELL customer service.
Defect
Cause
Elimination
Machine cannot be switched on
No mains voltage
Check power supply
Undervoltage shutdown
No mains voltage (power
interruption)
Switch machine off and on again
Saw band is stuck
Dull saw band
Replace saw band
Wood is too damp
Chip ejection blocked
Extended operation without
extraction
Connect to an external extraction,
e.g. portable dust extractor
8 Special accessories
-
Pair of adapters for parallel stop for hooking into the guide rail
Order No. 037195
-
Guide rail cpl., 3 m (9.8 ft) long
Order No. 037037
-
Guide rail extension part, 1.5 m (4.9 ft) lang
Order No. 036553
-
Guide rail one-piece, cpl., 3 m (9.8 ft) long
Order No. 200672
-
Transport cart Z 5 Ec
Order No. 202110
-
Saw bands, 10 pcs 1752 x 6 x 0.65 4 teeth/1”
Order No. 092335
-
Saw bands, 10 pcs 1752 x 6 x 0.65 6 teeth/1” fine
Order No. 092333
-
Saw bands, 10 pcs 1752 x 8 x 0.65 4 teeth/1”
Order No. 092336
-
Saw bands, 10 pcs with serration 1752 x 8 x 0.65 4 teeth/1”
Order No. 092337
9 Exploded drawing and spare parts list
The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com
