Maestro MICROTRACKER MT-01, Технические характеристики

Страница: 14 / 56

– Positioning accuracy: 7m outdoors (CEP 95%) and <20m indoors
– Supports GPS L1-band, C/A code
– High sensitivity down to -155.5dBm for both acquisition and tracking
– TTFF typically 3s when hot and <40s from cold (outdoors)
– Supports A-GPS position aiding
1.7 Status Indicator
– One red color LED indicating GPS position fix
– One green color LED indicating GSM registration
1.8 Electrical Interface
– 10-pin connector
2
– Connection for:
•
Power supply (from vehicle battery)
•
Primary digital output for driving external relay (“Starter Disabling”)
• Secondary digital output for driving additional relay or LED, etc. . .
• Primary digital input for ignition detection, active between 6 to 32Vdc
•
Secondary digital input (reserved) , active between 6 to 32Vdc
•
Analog input for sensor reading, maximum absolute rating. 5V, 20mA
– All digital inputs and digital outputs are opto-isolated and all interfaces are ESD protected.
1.9 Service Port
– Accessible from outside only after removing a plastic lid
–
Serial port at logic 2.8V TTL level (UART) + other electrical test points
– Using external RS232 transceiver for connection to a computer for diagnostic and factory settings
1.10 Functions & Features
– Immediate on-request reporting of vehicle status (position, speed, mileage, ignition status, GSM
RSSI. . . )
– Periodic reporting of vehicle status (time and/or distance based)
– Call screening
2
See section 2.1.2
14
Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
3603-9, 36/F., 118 Connaught Road West, Sheung Wan, Hong Kong
contact@maestro-wireless.com