Chapter 4
Step by Step - Quick Start Guide
4.1
First installation
1. Install the wire harness in the car, follow 2.1.3 instructions. The minimal setup consists of only
connecting the red and black power supply wires. DO NOT connect the Micro Tracker to the wire
harness yet.
2. Insert the SIM card in the SIM card holder, ensure that the holder is well closed and slided in lock
position before you put back the plastic lid.
3. Note down the IMEI and SIM card phone number for future reference, it will help for configuring the
tracker.
4. Plug the tracker on the wire harness.
5. Wait a few seconds, and verify the LED status, C (Cellular) green LED should be solid lit, G (GPS)
red LED should be blinking, or solid lit.
Note:
All configuration commands have to be sent to the MicroTracker by SMS.
6. Send configuration command, the first command to be set is the SG106, to setup the server address,
APN, and the phone number to receive the MicroTracker SMS reply. Please see the next chapter for
details about the SMS commands
7. Setup alert report, one which can be checked and set up easily (for testing and evaluation) is the
automatic time-based reporting, for example every 60 seconds : SG208,60,0
8. Put the tracker under the sky (follow instructions on the MT-01 casing), verify that the G red LED goes
solid. You can now connect to the m2mgateway.net website.
9. Please contact Maestro Wireless Solutions to get access credentials for the M2Mgateway.net website
if necessary (provide the IMEI number of the tracker) to obtain login informations
10. Connect to the platform using your credentials, and check your reports online.
4.2
Run a test in your car
1. After having checked that you can get heartbeat report with your unit on the m2mgateway.net platform,
you might want to test all the alert features of the MicroTracker. For that you will have to switch on
some alert reporting.
2. To do so, use SG211 command
, for example:
SG211,10,1,14400,1,0,40,40,10,0,600,1,28800,1,600,1,TEST#1,
3. Setup the ignition as required
, for example, if you plug the white wire on the car starter:
SG104,1
1
Refer to 5.2.2 SG211 command
2
Refer to 5.2.1 SG104 command
Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
3603-9, 36/F., 118 Connaught Road West, Sheung Wan, Hong Kong
23
