For the format of this periodic location reporting, please refer to event number 702 (wired ignition) and 703
(virtual ignition) described in chapter 6.
–
Where <ALT_ON> is to enable / disable alert message, which is triggered by an ignition ON:
•
0 = disable
•
1 = enable.
For the format of this alert message, please refer to event number 611 (wired ignition) and 612 (virtual
ignition) described in chapter 6.
Default setting: <INT_ON> = 0, <ALT_ON> = 0
Example:
Set alert of Ignition ON and report every minute
Command: SG201,60,1
Response: @352238020015913,201,60,1!
SG202: Set ignition OFF periodic location reporting & alert
Command: SG202,<INT_OFF>,<ALT_OFF>
Response (SMS): @<ID>,202,<INT_OFF>,<ALT_OFF>!
–
Where <INT_OFF> is the interval in
seconds
between each successive location reporting when
ignition is OFF. If it is set to any value between
10 and 65000 with increment of 10
, then periodic
location reporting will be enabled with reporting interval as the value set. If value set to 0, then
periodic location reporting will be disabled.
For the format of this periodic location reporting, please refer to event number 705 (wired ignition) and 706
(virtual ignition) described in chapter 6.
–
Where <ALT_OFF> is to enable / disable alert message which is triggered by an ignition OFF:
•
0 = disable
•
1 = enable
For the format of this alert message, please refer to event number 614 (wired ignition) and 615 (virtual
ignition) described in chapter 6.
Default setting: <INT_OFF> = 0, <ALT_OFF> = 0
Example:
Set alert of Ignition OFF and report every hour
Command: SG202,3600,1
Response: @352238020015913,202,3600,1!
SG203: Set direction change threshold
Command: SG203,<TH_DC>
Response (SMS): @<ID>,203,<TH_DC>!
30
Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
3603-9, 36/F., 118 Connaught Road West, Sheung Wan, Hong Kong
