Maeda D3001, Руководство по эксплуатации

Страница: 151 / 294

M A E D A Mini-Crawler Crane Section 4 – REMOTE CONTROL SYSTEM COMPONENTS
3/2019 MC305C-3 4-87
Control Box
The Control box contains the receiver devices
and control devices.
Never attempt to dismantle this Control box.
Main Switch
The Main switch is a toggle switch to power ON
or OFF the Receiver
Fig. 4-231
• ON:
Turn the toggle to ON to start the
Receiver.
• OFF: Turn the toggle to OFF to terminate the
Receiver.
CAUTION:
• Before starting the engine, always turn this
Main switch of the Receiver to OFF.
• Where the remote control is not in use,
always turn the main switch of the
Receiver to OFF.
Monitor Display
In the event that the abnormal signal detector of
the controller serves, the Monitor display
indicates error codes.
Fig. 4-232
CAUTION: In the event that the monitor
display (3) indicates an error code, settle the
error as follows:
1. Push the Reset button of the Transmitter.
2. When the practice as above 1. results
another error code, once turn the Receiver
OFF, then start it again.
3. When the practice as above 2. results
further error code, it is suspected that the
Transmitter or Receiver has faults; contact
us or our sales service agency.
For more information on error codes, see
"TROUBLESHOOTING" on page 5-82.
Receptacle
Connect the connection cable from the
Transmitter, here.
Fig. 4-233
CAUTION:
• Before attaching the connection cable to
the receptacle (4), always confirm that the
Main switch is in the OFF position.
After the insertion, secure the plug by the
screw.
• Always apply the water proof cap while the
remote control is not in use.
• In the condition where the remote control
is not provided, this receptacle (4) is
incompetent. Always keep the water proof
cap attached.