Maeda D3001, Руководство по эксплуатации

Страница: 154 / 294

Section 4 – MODE SETTING OF THE TRANSMITTER Mini-Crawler Crane M A E D A
4-90 3/2019 MC305C-3
Messages in the A Mode Screen
Refer to the figure for the A MODE screen:
Fig. 4-239
It contains eight function items ((1) to (8)) and
the Exit command (9).
NOTICE: In the A MODE, following applicable
items are adjustable, as required:
(1) "Contrast ratio" of LCD screen
(2) "Loudness control"
(3) The "Engine speed limit", controllable by the
Accelerator lever.
(4) LCD backlight, "Time for lighting, until the
auto-cut".
(5) "Auto Shut-OFF time" of the Transmitter
power.
(6) "Low idling rate" of the engine.
(Idling only while the crane operation levers are
manipulated.)
(7) Reset of "user values" by the speed set-up
mode.
(8) Version information of the Transmitter
firmware.
To switch the function item to another, or to
change the setting value of the function, use, the
Hook raising and lowering lever.
Then, to fix the value in the function, push the
hook Stow/Setting button.
Fig. 4-240
LCD Screen Contrast Ratio
CAUTION: The LCD screen may be illegible
when it is set too light or too dark, which
may prevent correct operations. Adjust its
contrast adequately for comfortable read.
Adjust the contrast ratio of the LCD screen:
Fig. 4-241
1. Shift the cursor (▲ or ▼) using the Hook
raising and lowering lever.
• To darken: Push the upper end of the
Hook raising and lowering
lever.
• To lighten: Push the lower end of the
Hook raising and lowering
lever.
2. When the desired contract is obtained, push
the Hook stow/Setting button. The condition
obtained in above 1. will be fixed and the
display returns to the A MODE screen.