FLY SCREEN
INSTALLATION
The fly screen attaches to the
quick-release base just like the
adjustable brackets do, with
slotted brackets that slip in
under the knobs. First you will
have to assemble the brackets onto the fly screen. Please refer to the hardware
diagram above for hardware placement and the photo below for bracket position.
Just as with the windshield, do not over-tighten the truss screws; it isn’t necessary.
Once the fly screen is assembled, it can be slipped onto the four quick-release
knobs on the mounting base. Make sure you slide the fly screen down into the
slots, and secure all four knob screws before driving. Please note that the fly
screen IS NOT adjustable and is not intended for highway wind protection.
Plastic flat washer
Rubber
washer
M5 truss screw
Fly Screen
