Page 2
For technical questions, please call 1-888-866-5797.
63728
Specifications
Bushing Range
(Outside Diameter)
2.17 in., 2.32 in., 2.48
in., 2.62 in., 2.76 in.,
2.81 in., 2.87 in., 2.89 in.,
2.95 in., 3.05 in., 3.21 in.,
3.27 in., 3.48 in.
Sleeve Size
(O.D.=Outer Diameter)
3 in. O.D. x 2.56 in. Long
3.4 in. O.D. x 2.56 in. Long
3.6 in. O.D. x 2.56 in. Long
4 in. O.D. x 2.56 in. Long
Sleeve Plate Size
3.4 in. x 2.72 in. Step
4 in. x 3.2 in. Step
Bolt Size
7/8 in.
Nut Size
2.36 in. Long x 0.875 in.
Diameter
IMPORTANT SAFETY INFORMATION
Use Precautions
1. Support vehicle securely on lift or
jack stands before service.
2. Thoroughly inspect and test serviced components
after use of this set and before using the vehicle.
3. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.
4. Inspect before every use;
do not use if parts loose or damaged.
5. Use as intended only.
6. Read service manual for vehicle
before set up and/or use.
7. Keep away from children. Do not allow children
to play with item. Contains small parts.
8. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
9.
Keep children and bystanders
away while operating.
Distractions can cause you to lose control.
10.
Wear ANSI-approved safety goggles,
NIOSH-approved dust mask/
respirator, and heavy-duty work
gloves during use and service.
11. Use according to instructions in
vehicle service manual.
12. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
13. Stay alert and use common sense when operating.
Do not use when tired or under the influence
of drugs, alcohol or medication.
14. Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry
or long hair can be caught in moving parts.
15. This product is not a toy.
Keep it out of reach of children.
16. Use the correct product for the correct vehicle.
The correct product will do the job better and
safer at the rate for which it was designed.
Do not modify this product or use it for a
purpose for which it is not intended.
17. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may
affect the product’s operation. If damaged, have
the product repaired before use.
18. Read and understand all instructions and safety
precautions as outlined in the manufacturer’s
manual for the vehicle you are servicing.
19. The warnings, precautions, and instructions discussed
in this instruction manual cannot cover all possible
conditions and situations that may occur. It must
be understood by the operator that common sense
and caution are factors which cannot be built into
this product, but must be supplied by the operator.
