MADDALENA microCLIMA/SENSOSTAR 2 MSH, Инструкция по установке и эксплуатации

Страница: 14 / 14

Doc. code 1080100090 Version: 2015_03_03 14
Reset The measurements since the last
storage of data in the E
2
PROM are
lost (max. one day).
EMC
E
2
PROM fault After a reset, the instrument is
without function. Defective component
Check sum fault No calculations are carried out. The
registers for flow and energy are
not being updated (no new data is
being stored). Defective component
11 Mounting with Wall Support
For mounting the calculator on the wall, a sticker pad and a wall mounting support are available. They must be
ordered separately. The adhesive surfaces must be clean and free of grease.
12 MID Declaration of Conformity
For the product described in this document we confirm, as the manufacturer, that it meets the fundamental
requirements of the following directives:
- Directive 2004/22/EC of 31 March 2004 on measuring instruments, in particular those in Annex MI-004
- Directive 2004/108/EC on EMC
- Directive 2006/95/EC on low voltage
- Directive 1999/5/EC (R&TTE)
The complete signed declaration can be found at www.engelmann.de .
13 Manufacturer
Engelmann Sensor GmbH
Rudolf-Diesel-Str. 24-28
69168 Wiesloch-Baiertal – Germany
Tel: +49 (0)6222-9800-0
Fax:+49 (0)6222-9800-50
E-Mail: info@engelmann.de
www.engelmann.de
14 Contacts
Maddalena S.p.A.
Via G.B. Maddalena, 2/4
33040 Povoletto (UD) – Italy
Tel.: +39.0432.634811
Fax.: +39.0432.679820
www.maddalena.it
Subject to technical change without prior notice.