Macurco MRS-485, Инструкция пользователя

Страница: 38 / 80

Macurco DVP-120C Manual
REV – 1.0 [34-8708-4770-8 ] 38 | P a g e
type
Figure 4-38 Configure Sensor Type
From this menu, you can access any of the following menus to view type parameters using the navigation key up,
down, left and right. This menu is read only i.e. changes cannot be made.
Type: 01 CO
Good definition
Figure 4-39 Sensor Definition
CO for carbon monoxide is one of the 2 Macurco sensor types already defined
Type: 01
Tag: CO ♦
Figure 4-40 Sensor Tag
“Tag” is a 3-character parameter and is used to identify the sensor type (i.e. CO, NO
2
...)
Type: 01 CO
Units: ppm ♦
Figure 4-41 Sensor Units
“Units” is a 4-character parameter and indicates the engineering units (i.e. ppm)
Type: 01 CO
Depletion: 0 No
Figure 4-42 Depletion Type
“Depletion” is “1” when the sensor is a depletion type and “0” when it is not a depletion type sensor. A depletion
sensor detects when gas concentrations in a space fall below a specified level.
Type: 01 CO
Dec.: 0 8888. ppm
Figure 4-43 Decimal Points
“Dec.” defines how many decimal points are used to display the reading, alarm, warning, range, rising and falling
levels. It can have values between 0 and 2.
Type: 01 CO
Res.: 1 ppm