PM150-CO2 Portable Gas Monitor
REV – 1.0
[34-2900-0211-5]
3
|
P a g e
Technical Support Contact Information
WARNING
Any unauthorized attempt to repair or modify the product, or any other cause of damage beyond the range
of the intended use, including damage by fire, lightening, or other hazard, voids liability of the manufacturer.
Only activate this product only if sensor, visual, detection, and audible cover are clear from contaminants such
as dirt and debris that could block the area where gas is to be detected.
Do not clean and rub the LCD screen of the products with a dry cloth or hands in hazardous environment to
prevent static electricity buildup.
If the CO2 concentration reaches 0 ppm, a calibration should be performed.
CAUTIONS
Before operating this device, please read and understand this manual.
This device is not an analyzer, but a gas detector.
Do not use the device if calibration and self-test continuously fail.
Clean device with a soft cloth. Do not use chemical substances for cleaning.
View a serial number on the label at the back side of the device. (ex. 2021.01.01)
1.
The serial number indicates below.
ex: SL 01 01 001 2021(Year) 01(Months) 01(Day) 001(Manufacture Order)
