60
Configuring Contribute and Contribute Publishing Server to work with your website
3.
Enter the CPS administrator password you created during the installation process, and then
click
Login
to log in to the CPS Console.
The CPS Console appears. Make a note of the CPS Console web address that appears at the
top of the Overview panel; you’ll need this address later when you enable CPS in Contribute.
4.
Select User Directory from the
Services Settings
list on the left.
At this point, you should configure the User Directory. You can also configure the E-mail, and
Log services now, or you can do it later.
Note:
The Website Settings category shows the website-specific settings for websites you’ve
enabled CPS for. You’ll enable CPS for your website next, and then configure Website Settings.
5.
Enter all the settings to configure the User Directory service.
For more information about any of the settings, click the
Help
link to show online help.
6.
Click
Save Settings
to save your settings.
Tip:
If you want to use secure LDAP, see
“Configuring the User Directory service to use secure
LDAP” on page 60
after you configure the User Directory service.
7.
(Optional) Select another service from the
Services Settings
list on the left if you want to
configure the other services now.
Now you are ready to start Contribute, and enable your website to use CPS. To do so, see
“Enabling Contribute websites to work with CPS (CPS only)” on page 61
.
Configuring the User Directory service to use secure LDAP
The default configuration of the User Directory service does not encrypt communications to the
LDAP server. You can configure the service to use secure LDAP (LDAPS) to encrypt information
to and from your LDAP server.
