USER MANUAL
PD-SATA USB/LAN
If you experience
network connection
problems, use the
IP address instea
of the STORAGE
name.
d
LAN disk settings
o not apply when
e disk is mounted
via USB connection.
for the LAN disk, press and
hold the reset button, turn on the power and wait for the LED to
stop blinking (~30 sec). Release the button and reboot the LAN
disk. This will reset the device to its factory default settings.
Q: SMB access doesn’t work on Mac OS 10.4.
A:
With earlier versions of Mac OS 10.4, the LAN disk can not
be accessed through SMB. Please upgrade to Mac OS 10.4.3
or later to resolve this problem.
Q: FTP access on my Mac doesn’t work properly!
A:
The FTP utility on the Mac will be able to read the dat
n
the LAN disk but you can not write new data to the drive. To
.
hat’s
the correct IP?
A:
See chapter 4.1 about how to login. If none of these
instructions help, reset your device. Connect it directly to your
computer via Ethernet cable and access the web configuration
using 169.254.0.1.
Q: My HDD is not recognised.
A:
The LAN disk can only access the first partition and it has to
be formatted using the FAT32 file system. We recommend
using the disk utility of the LAN disk to format the drive.
Q: Which ports do I have to open on my firewa
A:
epending on the services that are used, the following TCP
t 21,
port 80 and UDP port 14675 for the
AN disk utility.
d
th
up
6 Appendix
6.1 FAQ
Q: I forgot my login, what do I do?
A:
If you forgot your personal login
a o
load files, you will need to install a dedicated FTP application
Q: I can not access the web configuration interface, w
ll?
D
ports will have to be opened for the LAN disk: FTP por
SMB ports 137-139, HTTP
L
Page 34 / Chapter6 - Appendix
